General Information

• We sell to a large range of clients, in all sorts of businesses, providing a trusted service at competitive prices.
• All motors supplied with 12 months warranty complete with factory acceptance tests and standards conformity certificates

Standard Features

• Energy efficient standard motor with premium high-efficiency option
• IP55 enclosure provides protection again dust and water jet
• Robust cobstruction for industrial use
• Vacuum impregnation for better insulation
• Wide range of rated voltage (380V to 415V) – ‘Multivoltage’
• Windings made of copper wire enamelled with class H polyester varnish
• Bearings provided by world-class manufacturers

Multivoltage Motors

TEC multivoltage motors are designed to work with voltages in the range 380V -5% to 415V +6% with class B temperature rise (80k). this means that the motors meet most 50Hz supplies world-wide:

• 220/380V +/-5%
• 230/400V +/-10%
• 240/415V +/-6%

These motors are also suitable to operate at 60Hz (460V +/-10%), with modified performance data. Other design voltages and special performance characteristics are available on request.

Thermal Protection

The following motor protections are available:

• Motor protection with PTC thermistor sensors in the stator winding (1 or 2 per phase)
• Thermostats with normally open or normally closed contacts in the stator winding
• RTD (type PT100) for monitoring the winding or bearing temperature

Options:

• Cable glands
• Roller bearings on drive end
• Taconite labyrinth seal
• Second shaft end
• Drip cover (canopy) for shaft down applications
• Additional terminal box
• Flanges
• Regreasing system for frames 160 up to 200
• Special painting plan for aggressive environments
• Space heaters
• Thermistors up to frame 200

Main Features:

• 2 and 4 pole motors ex-stock up to 315 KW
• 6 pole motors up to 250 KW
• 8 pole motors up to 220 KW
• Single phase up to 3.7KW, PERM CAP, CAP/CAP and speed controllable motors
• 6 and 8 pole single phase available on request
• 110 vlot single phase up to 3.7 KW ex-stock
• 2 speed dual, tap wound fan rated and constant torque motors ex-stock
• EEXD ATEX approved 2 and 4 pole up to 315 KW
• EFF1 motors ex-stock
• Brake motors up to 18.5 KW 2, 4 and 6 pole ex-stock
• Larger sizes available on request
• Increased output motors ex-stock up to 100 KW
• Thermistors as standard
• New range of DC motors
• Same day modifications
• On-site warranty replacements
• After-sales support
• Megawatt + KVA motors available on request

We also supply a full range of IP56 Marine duty motors and IP65 Mining Duty Motors in the above range.